Reset To Factory Default; Cleaning And Care - Klarstein Alpbach Mode D'emploi

• Press the OK button to set the second period. Follow the same procedure as for
setting the first period.
• Press the + or - button to complete the setting and then press the OK button. The
screen displays „finish".
• Multiple time periods can be set for one day only.
• One time period can be used for several days.
Notes
• Note that any changes made in the mode setting must be saved by pressing the OK
button.
• A maximum of 8 time periods can be set for a program.
• After you make the manual setting, the default settings are replaced by these.

RESET TO FACTORY DEFAULT

Unplug the power cord from the wall outlet for at least 5 seconds before plugging it
back in. The unit will then be reset to the factory settings.

CLEANING AND CARE

Note: Maintenance of the device should only be carried out by qualified personnel.
• Over time, the glass will become dirty or dusty. Dust can be removed by cleaning
the glass with a clean cloth or paper towel.
• Remove fingerprints or other dirt with a damp cloth and glass cleaner.
• Always dry the glass completely after cleaning before using the machine.
• Never use aggressive cleaning agents to clean the glass, and never spray liquids
directly onto the surfaces of the machine.
EN
37