Klarstein Alpbach Mode D'emploi page 30

EN
30
Brightness adjustment
With the brightness adjustment the flame brightness can be adjusted. Press the MENU
button (D) and select the brightness adjustment. The screen displays „bri" and a light
bulb symbol flashes:
• Press the OK button to enter the brightness setting.
• Press the + (E) or - (F) button to select the brightness level.
• You can choose between five brightness levels. The factory default setting is „3".
„5" is the highest brightness level and is displayed on the screen as follows:
Timer
Press the MENU button and select the timer setting. Hour" is displayed on the screen
and the timer icon flashes:
• Press the OK button to enter the timer setting.
• Press the + (E) or - (F) buttons to set the time.
• The following times can be set: 00-30 min, 1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H and
9H. The factory default setting is „00":