Maintenance; Solution Of Installation Problems; Specifications - Videotec CBZ220 Manuel D'instructions

Maintenance

The CBZ220/CBZ24 keyboard doesn't need a special maintenance.
Make sure they always rest on a solid base, and that the power supply and connection cables do not hinder the
operator.
Switch off the appliance to clean it. Clean the keyboard at regular intervals with a cotton dry cloth, avoiding the
use of detergents or wet cloths.

Solution of installation problems

Even if the CBZ220/CBZ24 keyboard are easy to use, some problems may arise during installation, configuration or
use.
Problem
At the swicthing on, the
POWER led does not turn on
The keys work, but the pan &
tilt does not respond
The keys work, but the zoom
lens does not respond

Specifications

Power supply:
Power consumption:
Max switching power:
Protection fuses:
Operative temperature:
Pan & tilt control voltage:
Construction:
Finish:
Dimensions:
Weight:
Possible cause
Power supply disconnected
Improper power supply
The fuse is blown
Incorrect connections
The voltage supplied by the CBZ220/CBZ24
does not correspond to the voltage required by
the pan & tilt
Incorrect connections
24/230Vac, 50/60Hz(refer to identification data)
4 W
45 W
24Vac Version F1 500mA F 250V; F2 1.6A T 250V
230VacVersion F1 50mA F 250V; F2 630mA T 250V
from 0°C to 40°C
24/230Vac, 50/60Hz (refer to identification data)
extruded aluminium with rubber parts
coated with epoxy powder
115x190x50mm
900g
Page 10
Remedy
Check the power supply cable
Check the identification data
Replace the fuse
Check the connections between the
keyboard and the pan & tilt
Check the keyboard and pan & tilt
identification data
Check the connections between the
keyboard and the zoom lens
MNVCCBZ_0828