Connectors; Connection Of The Cbz220/Cbz24 Keyboard To Peripheral Units; Connection Of The Cbz220/Cbz24 Keyboard To Pan & Tilt Motor - Videotec CBZ220 Manuel D'instructions

Connectors

At the rear of the mechanics the CBZ220/CBZ24 keyboard features one protection fuse and 3 connection
cables for power supply, pan & tilt and zoom lens (this last cable is present only in the CBZ220/CBZ24 keyboard):

Connection of the CBZ220/CBZ24 keyboard to peripheral units

The connection of the CBZ220/CBZ24 keyboard to the peripheral units presents the following phases:
• Connection of the keyboard to pan & tilt motor
• Connection of the keyboard to zoom lens
• Connection of power supply cables
Connection of the CBZ220/CBZ24 keyboard to pan & tilt motor
WARNING: before the connection, make sure that the output voltage of the CBZ220/CBZ24 keyboard
corresponds to pan & tilt voltage (Refer to the identification data of the keyboard and pan & tilt motor).
Where to operate: output cable for pan & tilt connection
Settings: connect the wires to pan & tilt motor according to the following table:
7-wire cable for
pan & tilt
connection
3-wire cable for
6-wire cable for zoom lens connection
power supply
connection
Output wires from CBZ220/CBZ24
WHITE
BROWN
YELLOW
GREY
PINK
GREEN
YELLOW/GREEN
Connection to pan & tilt
Common
Down
Up
Right
Left
Automatic
Page 7 MNVCCBZ_0828