dB Technologies DVX DM TH Serie Caractéristiques Techniques page 10

ENGLISH
"Link" Panels
10) "BALANCED AUDIO LINK / OUT" OUTPUT CONNECTOR
The "XLR" connector connected in parallel with input (1) can be used to send the input audio signal
to another amplified speaker.
11) "MAINS LINK / OUT" POWER SOCKET
For linking the mains power. The output is connected in parallel with input (8) and can be used to
power another active speaker. The connector is a POWER CON® (grey) socket.
12) COOLING FAN
It allows to cool down the amplifier during operation.
Don't obstruct the openings and clean the grids when needed to ensure proper air recirculation.
CONNECTIONS
Connecting to the mains supply
Each active speaker features its own power cable. Connection is done by a Neutrik POWER
CON® (blue) model which permits easy and fast connection to the speaker as well as being an
excellent locking system.
The same connector serves as a switch to turn ON and OFF the active loudspeaker by turning the
connector to the left (OFF) or right (ON).
The active speaker must be connected to a mains supply able to deliver the maximum required
power.
Main power supply linking
On the right side of the speaker, a Neutrik POWER CON® connector (grey) offers linking the
mains power supply.
This socket links the mains supply to another speaker, thereby reducing the direct connections to
the mains.
Maximum amplifier input power is shown on the amplifier panel.
The maximum number of speakers connected together depends by max input power and of the
maximum allowed current of the power source.
9
DVX DM TH Professional Stage Monitor