ECOVACS Deebot X1 Plus Manuel D'instructions page 27

No. Malfunction
No singal found. Unable to
4
return to the Station.
DEEBOT returns to the
5 Station before it has
finished cleaning.
6 DEEBOT is not charging.
Running is very loud
7
during cleaning.
EN
26
Possible Causes
The Station is incorrectly placed.
The Station is out of power or manually moved.
DEEBOT does not start cleaning from the
Station.
The charging route is blocked. For example,
the door of the room with the Station is closed.
The room is large and DEEBOT needs to return
to recharge.
DEEBOT is unable to reach certain areas
blocked by furniture or barriers.
DEEBOT is not switched ON.
DEEBOT's Charging Contacts are not
connected to the Station Pins.
The Station is not connected to the power
supply.
The battery is completely discharged.
Dual Dual Side Brushes and Floating Main
Brush are entangled. Auto-Empty Dust Bin and
filter are blocked.
DEEBOT is in Strong Mode.
Solutions
Please place the Station correctly according to the
instructions in the [Charging DEEBOT] section.
Check whether the Station is connected to power supply.
Do not move the Station.
It is recommended that DEEBOT start cleaning from the
Station.
Keep the charging route clear.
Please turn on Continuous Cleaning. For more details,
please follow the App guidance.
Tidy up the area to be cleaned by putting furniture and
small objects in their proper place.
Switch ON DEEBOT.
Make sure that the robot's Charging Contacts have
connected to the Station Pins and the AUTO Mode Button
flashes. Check whether DEEBOT'S Charging Contacts and
the Station are dirty. Please clean these parts according to
the instructions in the [Maintenance] section.
Make sure the Power Cord is firmly connected to the
Station.
Please contact Customer Care for help.
It is recommended to clean the Dual Side Brushes, Floating
Main Brush, Auto-Empty Dust Bin, filter, etc. regularly.
Switch to Standard Mode.