ECOVACS Deebot X1 Plus Manuel D'instructions page 12

Empty Station (back)
Power Cord Wrap
Dust Bag
Notes Before Cleaning
Power Cord Port
Dust Bag Handle
Tidy up the area to be cleaned by
putting furniture, such as chairs, in
their proper place.
During the first use, make sure each
room door is open to help DEEBOT fully
explore your house.
It may be necessary to place a physical
barrier at the edge of a drop to stop the
unit from falling over the edge.
Make sure areas to be cleaned are well
illuminated so Visual Detection works
properly. Remove power cords and
small objects from the floor to ensure
cleaning efficiency.
Put away objects including cables, cloths and slippers,
etc. on the floor to improve the cleaning efficiency.
Clean the AIVI Visual Detection Sensor and
TrueMapping Distance Sensor with a clean cloth, and
avoid using any detergent or cleaning spray.
Before using the product on a rug with tasseled edges,
please fold the rug edges under.
Please do not stand in narrow spaces, such as hallways, and
make sure not to block the Detection Sensor.
EN
11