Route Wiring And Safety Cable Into Extension Tube; Attach Upper Mount And Upper Mounting Brace - BIG ASS FANS 2025 Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. Route Wiring and Safety Cable into Extension Tube

Note: To facilitate installation, Big Ass Fans recommends that
the extension tube is horizontal with the rectangular access
hole facing up during this step.
A. Route the end of the controller input cable with the wiring
harness on it (the end without the three loose wires) down
into the top of the extension tube and out the rectangular
access hole as shown.
B. Route the end of the power supply cable with the wiring
harness on it down into the top of the extension tube and
out the rectangular access hole as shown.
C. Route the end of the safety cable with the lug on it down
into the top of the extension tube and out the bottom of the
tube as shown.

3. Attach Upper Mount and Upper Mounting Brace

Note: To facilitate installation, Big Ass Fans recommends that the extension tube is
horizontal with the rectangular access hole facing up during this step. Wiring and the
safety cable are not shown in the illustrations.
Insert the upper mounting brace into the top of the extension tube and align the
four mounting holes in the brace with the four mounting holes at the top of the tube
as shown on the right. Position the power supply cable, controller input cable, and
safety cable in any of the four spaces between the upper mounting brace and the
extension tube as shown below. Note: The cables can go in any of the four spaces.
They do not all need to be in the same space.
Attach the upper mounting brace (inside the extension tube) and the upper mount to
the extension tube using the Extension Tube Hardware as shown below. Tighten the
hardware so that it is snug, but do not torque.
Extension Tube Hardware:
a. (2) M10 x 90 mm Socket Head Cap Screw
b. (4) M10 Flat Washer
c. (2) M10 Nylock Nut
View from Above
Spaces
for
Cables
a
WWW.BIGASSSOLUTIONS.COM
© 2015 DELTA T CORP.
Controller
Input Cable
Access
Hole
Upper
Mounting
Brace
b
ALL RIGHTS RESERVED.
Power
Supply
Cable
Safety Cable
Upper
Mounting
Brace
c
b
11

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

30253600

Table des Matières