Snooze Function; Setting The Display Brightness - Beurer WL 90 Mode D'emploi

Activating/deactivating an alarm
Before setting an alarm, first select the alarm number; this device contains three alarms that can be con-
figured separately. You can also choose one of ten wakeup sounds, a beeping alarm, or the radio.
To select an alarm memory space, proceed as follows:
1. Select the desired alarm number pressing the ALARM button. The corresponding alarm icon will appear
in the LCD Display (multiple alarm memory spaces may be selected at the same time).
2. To deactivate an alarm, keep press the ALARM button again until the corresponding alarm icon disap-
pears from the LCD Display.
Setting an alarm time
1. Press and hold the ALARM button for two seconds.
2. The alarm hour field flashes in the LCD Display. Set the alarm hour using the ▲ / ▼ buttons. Confirm
with the ALARM button.
3. The alarm minute field flashes in the LCD Display. Set the alarm minute using the ▲ / ▼ buttons. Con-
firm with the ALARM button.
4. The alarm mode field flashes in the LCD Display. Set the desired alarm tone using the ▲ / ▼ buttons
(wakeup sound 1-10, beep, or radio). Confirm with the ALARM button.
5. The alarm volume field flashes in the LCD Display. Set the alarm volume using the ▲ / ▼ buttons. Con-
firm with the ALARM button.
6. The snooze time flashes in the LCD Display. Set the snooze time (1, 2, 5, 10, 20, or 30 minutes) using
the ▲ / ▼ buttons. Confirm with the ALARM button.
To activate an alarm time using the app, the smartphone simply needs to be paired with the Wake-up
Light while setting the alarm. Once you have set the alarm time and alarm mode, you can deactivate
Bluetooth on your smartphone or shut your smartphone off altogether. A continuous overnight Bluetooth
connection is not necessary.
Switching off the sunrise function
You can switch off the sunrise function by pressing any button; the alarm will not sound. The light is slightly
dimmed for two minutes. If you press any button again, the light will shut off.

Snooze function

When the alarm sounds, tap on the lamp dome to activate the snooze function; the alarm will sound again
when the set snooze duration elapses.
Shutting the alarm off
When the alarm sounds, press any button except Snooze. The alarm will shut off until the next day at the
set alarm time. The light stays on for two minutes after the alarm is shut off. To switch the light on again
after it shuts off, see the "lamp function" section.

Setting the display brightness

This device has four LCD brightness settings (0, 1, 2, 3, A). Brightness setting "A" (automatic) automat-
ically adjusts the display brightness to the surrounding light conditions. To set the display brightness,
proceed as follows:
1. Press both +/- buttons at the same time; "BL:" appears in the display. Set the desired display bright-
ness using the MODE button.
2. To confirm the display brightness, press both +/- buttons at the same time.
6