Operating Conditions; Switching On; Adjusting The Settings On The Terminal (10) - WELDY foiler Notice D'utilisation

6.2 Operating conditions

• Check the welding nozzle (3) basic setting.
• Connect the tool to the line supply. The line voltage must correspond with the voltage rating stated on the tool.

6.3 Switching on

Set the air blower switch (9) to I. Press the SELECT button (12) once.
The heating process starts with the last-saved settings. Select the desired program or program the temperature
and air flow as required.

6.4 Adjusting the settings on the terminal (10)

Start by pressing the SELECT Menu button (12). Note: When an indication flashes on the display (11), a change
can be initiated by pressing either the PLUS (13) or MINUS (15) button. Press the SELECT button (12) again to
go to the next step.
Language selection, temperature unit °C / °F
2 sec
Selecting the function program
1 ×
1. Welding PVC
2. 1-Free setting
The name of the program corresponding to the selected function program flashes on the display. Longer text scrolls
across the screen after 2 seconds and the name of the program is displayed again after 2 cycles. Within this period,
the SELECT Menu button (12) can be pressed again to adjust the temperature or the air flow.
24
3. 2-Free setting
1 ×
1 ×
1 ×
Language selection Temperature
°C / °F (see 6.4)
or
Selecting the function program
(see 6.4).
1 ×
1 ×
1 ×