Important Safety Notes - WELDY foiler Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
Operating Instructions
Congratulations on purchasing your foiler / foiler ETL!
You have chosen a first-class automatic hot-air welding machine which has been designed and manufactured in
accordance with the very latest knowledge available in the plastics-processing industry. High-quality materials
have been used in its manufacture.
WELDY foiler / foiler ETL
Welding machine

1. Important Safety Notes

You must read these Operating Instructions prior to commissioning the machine. These Operating Instruc-
tions must be kept with the device at all times. If you pass the device on to another person, you must
include the Operating Instructions.
In addition to the safety information in the individual chapters of these Operating Instructions, the following require-
ments must be strictly complied with at all times.
Warning
Caution
FI
(Original Operating Instructions)
Danger to life! Before opening the device, disconnect the power plug from the
outlet, because live components and connections are being exposed.
Danger of fire and explosion caused by improper use of the automatic welding
machine (e.g., material overheating), and particularly in the vicinity of flammable
materials and explosive gases.
Risk of burning! Do not touch heating element tube and nozzle when they are
hot. Always allow the device to cool down first.
Do not point the hot air flow at people or animals.
Connect the device to an outlet with a protective conductor. Any interruption of
the protective conductor inside or outside the device is dangerous!
Only use extension cables with protective conductors.
The nominal voltage indicated on the device must match the nominal voltage
on site. If the line voltage fails, the hot air blower and the drive must be switched
off, move out the hot air blower.
A circuit breaker is urgently required for personnel protection when the device is
used on construction sites.
The device must be monitored at all times during operation. Waste heat can
reach flammable materials that are not in view. The device may be used only
by trained specialists or under their supervision. Children are not permitted to
operate the equipment under any circumstances.
Protect the device against humidity and dampness.
GB
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Foiler etl

Table des Matières