Dell N1108T-ON Guide De Mise En Route page 12

Figure 1-4. Inserting Mounting Brackets
4 Repeat the process for the wall-mounting bracket on the other side of the
switch.
5 Place the switch on the wall in the location where the switch is being
installed.
6 Mark the locations on the wall where the screws to hold the switch must be
prepared.
7 On the marked locations, drill the holes and place all the eight supplied
anchors in the holes.
8 Insert the supplied screws into the wall-mounting bracket holes and
tighten them with a screwdriver. See Figure 1-5.
Getting Started Guide
11