Publicité
Les langues disponibles
Les langues disponibles
CARE AND MAINTENANCE
Cleaning your humidifier regularly helps eliminate odors and bacterial growth and helps maintain the per-
formance by reducing mineral build up on the oscillator.
Do not leave water in the water tank or base when unit is not in use for more than a day, as mineral depos-
its and bacterial growth may accumulate very quickly.
WARNING: To reduce the risk of fire or shock hazard, always turn off and unplug unit before accomplish-
ing any cleaning or maintenance procedures.
CAUTION: Never immerse the base of this unit into water.
NOTE: Never use harsh cleaners or chemicals on this humidifier. Do not use scouring agents on the outer
body, as this will scratch and mar the surface.
REGULAR CLEANING (ACCOMPLISH WHEN REFILLING TANK)
1.
Turn off unit and unplug from outlet.
2. Lift off water tank and empty any remaining water from tank and base.
3. Rinse water tank, cap, base and optional demineralization filter, if used, under faucet flow.
4. Wipe dry all parts with soft clean cloth or paper towels and reassemble.
WEEKLY MAINTENANCE
1.
Empty water from tank and base then fill water tank about half full with warm water and add two (2)
tablespoons of white vinegar.
2. Replace water tank cap tightly onto the water tank and swish solution vigorously around in the tank,
then let solution sit for 20 to 30 minutes.
3. Rinse the water tank very thoroughly with clean water. Do not leave any cleaning residue in tank.
Wipe surfaces dry with soft cloth.
4. To clean the base, first take a soft toothbrush or soft cloth and gently scrub the metal surface of the
oscillator. Do not scratch the oscillator with a hard object.
5. Make similar white vinegar/water solution as above and pour carefully into water basin portion of
base. Let solution sit for 20 to 30 minutes. Pour out solution. Rinse the water basin with fresh water
and wipe out thoroughly. Do not allow water or cleaning solution to get into control section.
6. Put a little vinegar/water solution on soft clean cloth and wipe down outer surface of unit.
7.
Dry outside surface body with soft absorbent cloth.
NOTE: If using optional demineralization cartridge AU500, replace it every 500 hours.
STORAGE
1.
Clean unit as outlined in above. Dry out unit thoroughly.
2. Store in original package if available. Keep this manual with unit. Take care that nothing heavy is
placed on top of the box.
3. Do not store unit in an attic or other high-temperature area, as damage will occur.
7
Publicité
