Télécharger Imprimer la page

Publicité

Les langues disponibles
  • FR

Les langues disponibles

- Carefully read the instructions contained in the present booklet as they supply important information relating to
safe installation, use and maintenance.
- Keep this booklet with care, for any further consultation by the various operators.
- Having removed the packing, make sure the unit is in good order and in case of doubt, do not use the unit, but call
on skilled personnel.
- Before connecting the unit, make sure the data appearing on the serial plate correspond to those of the main
electric supply.
- The unit must be used only by a person trained for its operation.
- For any repairs, please call exclusively an authorised technical service centre, and ask for original spare parts
only.
- Non compliance with the above may compromise the unit's safety.
- Do not wash the unit with direct or high-pressure water jets.
- Do not obstruct openings or draft grids or heat vents.
- All units are supplied with a 200cm long cable having the characteristics shown in Tab. 2.
In case of non-compliance with the indications contained in the present manual, both on the user's part and on the
installing technician's part, the Manufacturer declines any responsibility, and any possible accident or fault caused by
the above mentioned non-compliances will not be imputable to the Manufacturer.
The Manufacturer declines any responsibility for any imprecisions appearing on the present booklet, ascribable to transcription
or printing errors. Furthermore, the Manufacturer reserves the right to make any modifications to the product deemed useful
or necessary, without prejudicing its essential characteristics.

GENERAL REMARKS

-10-

Publicité

loading