Symbol And Notes Statement; General Notes; Designated Use; Safety Notes - DOLD SAFEMASTER W UH 6900 Mode D'emploi

Before installing, operating or maintaining this device, the user
manual must be carefully read an understood on the enclosed
CD.
Before installing, operating or maintaining this device, these in-
structions must be carefully read and understood.
The installation must only be done by a qualified electrican!
Do not dispose of household garbage!
The device must be disposed of in compliance with nationally
applicable rules and requirements.
Storage for future reference
To help you understand and find specific text passages and notes in the
operating instructions, we have important information and information
marked with symbols.

Symbol and Notes Statement

DANGER:
Indicates that death or severe personal injury will result if
proper precautions are not taken.
DANGER
WARNING:
Indicates that death or severe personal injury can result if
proper precautions are not taken.
WARNING
CAUTION:
Indicates that a minor personal injury can result if proper
precautions are not taken.
CAUTION
INFO:
Referred information to help you make best use of the product.
nfo
ATTENTION:
!
Warns against actions that can cause damage or malfunction of the
device, the device environment or the hardware / software result.

General Notes

The product hereby described was developed to perform safety functions
as a part of a whole installation or machine. A complete safety system
normally includes sensors, evaluation units, signals and logical modules
for safe disconnections. The manufacturer of the installation or machine
is responsible for ensuring proper functioning of the whole system. DOLD
cannot guarantee all the specifications of an installation or machine that
was not designed by DOLD. The total concept of the control system into
which the device is integrated must be validated by the user. DOLD also
takes over no liability for recommendations which are given or implied in
the following description. The following description implies no modification
of the general DOLD terms of delivery, warranty or liability claims.

Designated Use

The UH 6900 is an innovative wireless safety system to protect man and
machine. A feature of the wireless safety system is its safety-oriented
bi-directional radio transmission for transmitting signals between two wire-
less safety modules so that the two separate safety devices, each of them
installed on a different machine part that is not connected to the other by
wires (for example, moving machine parts), work together as one system.
Therefore SAFEMASTER W radio controlled safety modules are intended
for the wireless remote control of machines and plant parts that used to be
controlled by cable. Their usage is only restricted by valid safety instructions
that prohibit, for example, staying under suspended loads.
Designated Use
Typical applications are:
• Hazard areas where protective equipment is necessary for the safety of
persons but where wiring is impossible or not reasonable, for example
in applications with extremely wide-spread, extensive hazard zones;
• Mobile and stationary plants and equipment, for example large machines,
assembly halls and scaffolds, conveyor belts, high-rack warehouses,
warehouses, forklifts, etc.
• The radio transmission range is up to 800 m

Safety Notes

Risk of electrocution!
Danger to life or risk of serious injuries.
WARNING
• Disconnect the system and device from the power supply and ensure
they remain disconnected during electrical installation.
• The device may only be used for the applications described in the mu-
tually applicable operating instructions / data sheet. The notes in the
respective documentation must be heeded. The permissible ambient
conditions must be observed.
• Note the VDE and local regulations, particularly those related to protec-
tive measures.
Risk of fire or other thermal hazards!
Danger to life, risk of serious injuries or property damage.
WARNING
• The device may only be used for the applications described in the mutually
applicable operating instructions / data sheet. The notes in the respective
documentation must be heeded. The permissible ambient conditions
must be observed. In particular, the current limit curve must be heeded.
• The device may only be installed and put into operation by experts who
are familiar with this technical documentation and the applicable health
and safety and accident prevention regulations.
Functional error!
Danger to life, risk of serious injuries or property damage.
WARNING
• The device may only be used for the applications described in the mu-
tually applicable operating instructions / data sheet. The notes in the
respective documentation must be heeded. The permissible ambient
conditions must be observed.
• The device may only be installed and put into operation by experts who
are familiar with this technical documentation and the applicable health
and safety and accident prevention regulations.
• The unit should be panel mounted in an enclosure rated at IP 54 or
superior. Dust and dampness may lead to malfunction.
Installation fault!
Danger to life, risk of serious injuries or property damage.
WARNING
• Make sure of sufficient protection circuitry at all output contacts for
capacitive and inductive loads.
!
Attention!
• The safety function must be triggered during commissioning.
• Opening the device or implementing unauthorized changes voids any
warranty
• Please note: Validation according to DIN EN ISO 13849-2 is always
required for the complete system
• If more than one wireless systems are used at the same location, the
different systems must be set up for different radio frequencies.
• The equipment must be handled with care and be checked in regular
intervals, depending on the usage and as necessary.
You, as the installer of the machine or plant, must make clear reference to
these safety instructions in the relevant operating manual.
13
UH 6900 / 01.09.17 en / 891