Télécharger Imprimer la page

Warn 83340 Instructions D'installation page 6

Publicité

Les langues disponibles

Les langues disponibles

7. Attach the u-clips to the top of the grill bracket.
Shown in Figure 7A.
Figure 7B shows the attachment location of the
grill bracket using the 6mm hex head bolt and
lock nut provided in kit.
8. Attach the front bumper to the skid plate using
the 3/8 black button head bolts and lock nuts
provided in your kit. Two of the fasteners are
installed in the top most outside holes in the
bumper. The other two fasteners along with flat
washers and lock nuts are placed through the
flanges on the bottom side of the bumper and
through the face of the skid plate. Reinstall the
grill plate that was removed in step 1 at this time
using the factory screws.
WARNING
Read the vehicle's operator manual, winch
operator manual and all warning labels prior
to operation of UTV.
9. At this time you can make the choice of mounting
the winch to the top of the bumper as shown
in Figure 8, or in behind the skid plate with an
acquired mounting kit . Installing the rear winch
bolts has been made easier by the provided
access holes in the frame bracket that an
extension and 13mm socket can fit through.
WARN INDUSTRIES
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
PAGE 6
Figure 7a
Figure 7b
Figure 8
83624A0

Publicité

loading