Using The Bluetooth ® Speaker; Establishing A Bluetooth ® Connection - SilverCrest SBL 4 B2 Instructions D'utilisation Et Consignes De Sécurité

Using the Bluetooth
®
speaker
Establishing a Bluetooth
®
connection
Press and hold the Play / Pause,
On / Off button until the ON / OFF /
7
CONNECTION indicator LED flashes
8
blue and a signal of sound sequence.
The speaker will now attempt to connect
to the playback device (e.g. smartphone
or computer).
Switch on the playback device and acti-
vate the Blue tooth function. The speaker
®
identification on the playback device will
be SBL 4 B2. Then approve the connection
with the Bluetooth speaker. Please note
®
the requirements of the software on the
playback device. The signal LED will light
up blue and a acoustic signal.
The maximum range of the connection is
approx. 10 m, but may be reduced to the
geometry of the space (obstructing furni-
ture, walls, etc.).
The playback device must support Blue-
tooth standard 4.1. Otherwise you may
®
not be able to use all the functions listed
below.
38 GB/IE