Panasonic TY-ST85PB1 Instructions D'installation page 29

2. Preparing the stand
Lock the casters (wheels).
3. Preparing and fitting the display
Important
• Because the display is heavy, perform the work
carefully using a lifting device (machine).
• An operation panel is located on the right surface of
the display. Be sure not to hit it against any nearby
objects when fitting the display.
• Make sure that the stand hooks are firmly secured.
1. Attach the hook of the lifting device to
the eyebolt in the center of the display,
and then lift up the display.
2. Join the stand hooks
to the 4 notches on the
display mounting fixture
and let them drop in
until they stop.
CAUTION
Do not lift up the display higher than necessary.
• If the display is lifted too high, it may fall down and personal injury may result.
Locking and unlocking the casters
Caster locked
Stand hooks
Caster unlocked
Push the bottom
of the lever
Stand hooks
Notches
Push the top of
the lever
29