Operations - Kärcher NT 45/1 Eco Mode D'emploi

Operations

Turning on the Appliance
Plug in the main plug.
Turn on the appliance.
Adjust the suction output
Only Eco Te:
Set the suction output (mix - max) at the
rotary switch.
Working with electrical power tools
Only Eco Te:
Connect the mains plug of the electric
power tool to the vacuum cleaner (3).
8
English
Turn on the appliance (1).
Lamp is on - vacuum cleaner is in the stand-
by mode (2).
Note
– The vacuum cleaner is turned on and off
automatically with the electric power
tool.
– The vacuum cleaner starts automatical-
ly within 0.5 seconds and continues to
run for 15 seconds after the power tool
has been switched off.
– Please refer to "Technical specifica-
tions" for the power connection specifi-
cations of the power tools.
Adjust the stepped power tool adaptor
to fit the connection of the electric power
tool.
Remove the elbow from the suction
hose.
Attach the stepped power tool adaptor
to the suction hose.