Device Elements; Colour Coding; Start Up; Operation - Kärcher T 15/1 Mode D'emploi

Device elements

1 Fleece filter bag
2 Suction support
3 Suction hose
4 Cable hook
5 Carrying handle
6 Power cord
7 Mains plug holder
8 Storage compartment for hoses
9 Wheel
10 Suction head lock
11 Suction head
12 Steering roller
13 Dirt receptacle
14 Nameplate
15 Pickup for floor nozzle
16 Socket for electric vacuum brush
17 Main switch
18 Switch between hard surface/carpet
19 Floor nozzle
20 Adjustable telescopic suction pipe
21 Upholstery nozzle
22 Heater brush
23 Crevice nozzle
24 Lid lock
25 Cover
26 Telescopic suction pipe
27 Suction force regulator (continuous)
28 Bender
29 Exhaust filter
30 Filter casing
31 Main filter basket
32 Motor protection filter
33 Grid of the motor protection filter

Colour coding

The operating elements for the cleaning
–
process are yellow.
The controls for the maintenance and
–
service are light gray.
10
The appliance can be operated in 2 ways:
1 Operation with fleece filter bag or paper
filter bag (option)
2 Operation without filter bag
 Check whether main filter basket has
been inserted into the appliance.
Installation of the filter bag
 Release and remove the suction head.
 Remove the main filter basket.
 Install the fleece filter bag or the paper
filter bag (option).
 Insert main filter basket.
 Insert and lock the suction head.
Turning on the Appliance
 Plug in the main plug.
 Switch on the appliance at the main
switch.

Cleaning operations

 Set the selection switch of the floor noz-
zle to hard surface or carpet.
 Regulate the suction force on the suc-
tion force regulator (continuous).
 Perform the cleaning operation.
Turn off the appliance
 Switch off the appliance at the main
switch.
 Pull out the mains plug.
After each operation
 Empty the container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
– 2
EN

Start up

Operation