Operations - Kärcher NT 45/1 Tact Te Ec Mode D'emploi

Operations

Turning on the Appliance
 Plug in the main plug.
 Turn on the appliance.
Adjust the suction output
 Set the suction output (min - max) at the
rotary switch.
Working with electrical power tools
 Connect the mains plug of the electric
power tool to the vacuum cleaner (3).
 Turn on the appliance (1).
Lamp is on - vacuum cleaner is in the stand-
by mode (2).
Note
– The vacuum cleaner is turned on and off
automatically with the electric power
tool.
– The vacuum cleaner starts automatical-
ly within 0.5 seconds and continues to
run for 15 seconds after the power tool
has been switched off.
– Please refer to "Technical specifica-
tions" for the power connection specifi-
cations of the power tools.
 Adjust the stepped power tool adaptor
to fit the connection of the electric power
tool.
 Remove the elbow from the suction
hose.
 Attach the stepped power tool adaptor
to the suction hose.
11
English