Switching Your Radio On For The First Time; Power; Basic Operations; Adjusting The Volume - Albrecht Audio DR 900 BT Mode D'emploi

4

Switching your Radio on for the First Time

4.1 Power

• Connect the included power supply to the DC power socket of the radio and the 230V wall main
socket.
• Extend the telescopic antenna as far as possible.
• Switch the POWER to on, the LCD backlight will light up. The radio will automatically show:
• Press "Power" to turn on the radio, now the radio will perform a full scan for DAB stations. The
scan takes about 1-3 minutes. After finishing the scan it will start to play a station.
Note: From the second time on when you start your radio it will open the last listened mode and
station.
5

Basic Operations

5.1 Adjusting the volume:

• Tune the "VOL" wheel to increase and decrease the volume.
• Press ▼ for volume down or ▲ for volume up.

5.2 Changing Mode (FM/DAB/Aux-In)

• You can cycle through the four different modes by pressing the "Mode" button on radio or the
remote control.
Bluetooth
00:00
Welcome to
Digital Radio
DAB
Aux-In
English
FM
21