Klarstein VINOVILLA SMART Mode D'emploi page 33

Reversibility of the Door
1 Install the wine refrigerator in a place where the door can be opened at the
maximum angle.
2 Use a small knife (2) to remove the decorative nails (1) on the opposite side (see
figure 1).
3 Use the hexagonal screwdriver (5) to loosen the screws (4) of the drop guard (3),
and then remove the drop guard (see figure 1).
4 Hold the door and use the hexagonal screwdriver (5) to unscrew the door shaft
core (6) from both ends of the door. Remove the door and set it aside (see figure 2).
EN
33