Tylo Prime+1313/C Manuel D'utilisation page 9

• Connect wire S3 from the distribution plate to S3 from the Bench Skirt.
• Connect wire S1 from the distribution plate to S1 from the Bench Top.
• Connect wire #6 from the distribution plate to #6 on Bench Top.
•
Locate the electrical switch on the black Master Control Box and ensure the switch is on.
Bench Top (Right Side):
• Install the Right Bench Top by tucking the back of the bench under the heater guard. Push
Bench Top all the way to the Right Back Wall.
3 Person Infrared Sauna Prime+ 1313C Page 9 150612
Rev. 3