Tylo Prime+1313/C Manuel D'utilisation page 7

Bench Top (Box #1):
• Slide the Long Bench seat down against the back wall with Power Junction Box facing you.
•
Tilt the Bench against the Back Wall so it will remain standing.
Electrical Connections (under bench - left side):
• Connect wire L1 from the distribution plate to L1 from the Left Front Wall panel.
•
Connect wire B1 from the distribution plate to B1 from the Left Back Wall panel.
•
Connect wire #6 from the distribution plate to #6 from Bench Skirt.
• Connect wire S2 from the distribution plate to S2 from the Bench Top.
•
Connect wire S4 from the distribution plate to S4 from the Bench Skirt.
3 Person Infrared Sauna Prime+ 1313C Page 7 150612
Rev. 3