ARO SHG5056 Notice D'utilisation page 24

Cuisinière à gaz
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
How to use surface burners
Choice of cookware
Mind that the diameter of a pan base is
always larger than the burner flame crown,
and that the pan itself is covered. The
recommended pan diameter is around 2.5
to 3 times larger than the burner diameter,
that is, for:
an auxiliary burner – a pan with a dia-
meter of 90 to 150 mm,
a medium burner – a pan with a dia-
meter of 160 to 220 mm,
a large burner – a pan with a diameter
of 200 to 240 mm, and the pan height
should not be greater than its diameter.
WRONG
Gas burner control knobs
Position
"economical flame"
RIGHT
Position
burner "switched off"
Position
"large flame"
Ignition without an ignitor
light a match,
press in the knob to the end and turn it
left to the "large flame" position
ignite gas with a match,
set required flame size (e.g. "econo-
mical"
),
switch off the burner after finishing
cooking, turning the knob right (to the
off position
Caution!
In cooker models equipped with a surface
burner safety valve, hold the knob pressed
down to the end when igniting for 10 seconds
at the "large flame" position to activate the
safety device.
24
).

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour ARO SHG5056

Table des Matières