Publicité
Les langues disponibles
Les langues disponibles
Digital Anglefinder
Article number
"HOLD" function
Display Illumination
"Simple Miter" Operating Mode
"Compound Miter" Operating
Mode
Measuring range
Measuring accuracy angle
Lowest indication unit
Operating temperature
Storage temperature
Max. altitude
Relative air humidity, max.
Pollution degree according
IEC 61010
Alkaline Batteries
Operating time approx.
Automatic switch-off after approx.
Leg length
Weight according to EPTA-
Procedure 01/2003
Dimensions
(length x width x height)
IP 54 (dust and splash proof)
1) Conductive pollution occurs, or dry, non-conductive pollution occurs
which becomes conductive due to condensation, which is expected. In
such conditions, equipment is normally protected against exposure to di-
rect sunlight, precipitation, and full wind pressure, but neither tempera-
ture nor humidity is controlled.
The anglefinder can be clearly identified with the serial
number 10 on the type plate.
The anglefinder is intended for measuring and transfer-
ring angles and for calculating simple and compound mi-
ter angles. It is suitable for indoor and outdoor use.
6
2610035049 GAM220MF 05-19.indd 6
Technical Data
1)
Intended Use
GAM 220 MF
3 601 K76 610
●
●
●
●
0°...220°
±0.1°
0.1°
14 °F...122 °F / –10 °C...+50 °C
–4 °F...158 °F / –20 °C...+70 °C
6560 ft (2000 m)
90 %
2
4 x1.5V LR6 (AA)
80 h
30 min
15.75in / 400 mm
2.4 lbs / 1.1 kg
17.6 x 2 x 2.4 in /
447 x 52 x 60 mm
●
5/22/19 10:08 AM
Publicité
