Publicité
Les langues disponibles
Les langues disponibles
SETTING PROCEDURE
Warning: In order to avoid jamming the corrector buttons or damaging the movement, it is
extremely important that you do not make any adjustments (day, date, month and moon
phase) between 8 p.m. and 1 a.m.
To manipulate the corrector buttons, use the small tool provided in the watch packaging. To adjust your
watch, please ensure it is fully wound and then respect the following steps in this specific order:
Initial pre-setting stage
1.
Pull the crown to Position 2.
2.
Turn the crown to advance the hands (A, B) clockwise until the date (E) and day (K) change (when
the watch indicates midnight).
3.
Continue to turn the crown to set the hands to 5 a.m.
Setting the moon
4.
Press the corrector button (C4), until the full moon appears in the center of the moon
phase aperture (I).
5.
Then press the corrector button (C4) as many times as days have passed since the last full moon
(consult a calendar).
Date change
6.
Press the corrector button (C3) until the date hand (E) is positioned on the 1.
Setting the month and the year in the leap-year cycle
7.
Press the corrector button (C2) until the desired month (M) and position of the year (Y) in the leap-
year cycle are indicated.
Note: the position 4 corresponds to the leap years that occur every 4 years. Thus, if you set your watch
in 2016, which is a leap year, the Y hand must be positioned on 4. In 2017, it will need to be positioned
on the 1 and so on.
Setting the date
8.
Press the corrector button (C3) to advance the date (E) to the desired date.
Setting the day of the week
9.
Press the corrector button (C1) to advance the day (K) to the desired day.
Setting the time
10. Turn the crown to advance the hands (A, B) clockwise and position them at the desired time.
11. On the hourly time signal (reference clock, radio, etc.), push the crown back in to Position 1.
GENERAL INFORMATION
Care recommendations
Your Baume & Mercier watch was both designed and manufactured with great care. Please read our
recommendations for use and care on www.baume-et-mercier.com.
International warranty
Your Baume & Mercier watch is covered by the Baume & Mercier International Warranty.
The conditions of the Baume & Mercier International Warranty are available on www.baume-et-
mercier.com/customer-service/warranty.html.
Other information
If you have any questions, please visit our website www.baume-et-mercier.com.
You can also contact our authorized retailers in your country (list available on our website www.baume-
et-mercier.com) or contact us directly via our website using the contact form or by calling one of our
Client Relations Centers (www.baume-et-mercier.com/customer-service/contact-us.html).
Setting procedure – Baumatic - hour, minute, centre seconds, perpetual calendar
5
Publicité
