Refco DIGIMON-SE Guide D'installation Et D'utilisation page 11

Instruction Manual DIGIMON-SE / DIGIMON4
Select pressure unit
Hold down the
buttons.
Select temperature unit
Hold down the
both buttons.
Important note:
The device will save the last pressure and temperature units selected.
Memory function of the analogue pressure display:
Save value (current measurement value): press the
same time
Retrieve memory value: press the
Clear display: press the
Delete memory value: press the
Superheat/Subcool mode
SET
button. Use
SET
button. Use
LP/HP
button for 3 seconds
SET
+
R
to select the desired unit. Release both
-
R
to choose between °C and °F. Release
LP/HP
button for 3 seconds (display freezes)
LIGHT
and
SET LP/HP
and
saved value is no longer visible
buttons at the same time
English
buttons at the
9