Water Installation - Siemens pureFlow DW03500 Serie Notice D'utilisation

Place the press pads (16) located on the under-
■
side of the cover (15a) on the provided holder.
Make sure that both hook clips snap into place.
15a
16
Set all covers back in place.
■
Important
Please do not cover or otherwise impede access to
the pressure equalization aperture (15d) in the wa-
ter tank cover (15a).

Water installation

Important
Only use the enclosed parts for connecting to the
water supply and the waste water (only DW03500).
Pull off the transparent protective caps from the
■
waste water hose (13 – blue) and supply hose
(12– red) and insert a coupling on each.
Attach the waste water hose (13 – blue) with the
■
coupling to the blue hose set connection (11b).
Attach the supply hose (12 – red) with the cou-
■
pling to the red hose set connection (11a).
30
All manuals and user guides at all-guides.com
en
■
15d
Distance A: at least 10 cm
Lay out and arrange the hose set up (11) to the
water supply and water drain (see figure).
A A
DW03500