Télécharger Imprimer la page

Seko TEKNAEVO TPG Manuel D'installation page 7

Masquer les pouces Voir aussi pour TEKNAEVO TPG:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35
Display during Operation
FLOW
sensor
Operating mode
status

Batch
Batch
Lev
Alarms and statuses
 Lev = Level alarm
 Flw = Flow alarm
 Mem = Memory alarm
 Empty = pump in start
 Stop = pump stationary
 Paus = pump in pause
Paragraph 7 – Proportional to External Impulses (ppm dosage)
Programming
PROG
Configuration
Pump Funtions
-
+
Pump Functions
ppm Mode
-
ppm Mode
+
ppm
50
-
ppm Mode
ppm Mode
Pulse/L
Pulse/l
4
-
-
ppm Mode
L/pulse
-
ppm Mode
+
Conc(%)
100
-
-
ppm Mode
+
Memory
Off
-
Display during Operation
Operating mode

ppm
Ppm
Lev
Alarms and statuses

Lev = Level alarm

Flw = Flow alarm


Mem = Memory alarm


EM00136061
All manuals and user guides at all-guides.com
Memory
function
status
Programmed value

Quantity in ml
F
F F
M M
M
7.0ml
Stop
0
Current dosage value

Gradually displays
the dosed quantity
Pump status
The pump doses in proportion to an external signal (i.e.:
impulse launch counter), automatically calculating the
relationship between incoming signals and pump strokes on
the basis of the programmed ppm value.
The data to be entered is the ppm value, the impulse/litre
ratio (or litre/impulse) of the counter and the concentration of
-
the product to be dosed.
+
4
The dosage frequency can be modified during operation, by
+
-
pressing the
+
4
the flow, or the
FLOW
Memory
sensor
function
status
status
Programmed ppm
value
F F
F
M
M M
10
Stop
F300s/m
Current dosage value
 Frequency
Pump status
Empty = pump in start
Stop = pump stationary
Paus = pump in pause
rev. 2.5
Display during Setting (MODE key)
Operating mode
 Displays in sequence: quantity to
be dosed, dosage time and pump
frequency
Q.ty
7.0ml
 The quantity can be modified by pressing the
+ or – keys at the same time
Operation
keys at the same time to increase
keys to decrease it.
Display during Setting (MODE key)
Operating mode

Displays in sequence: cc/stroke,
impulses/minute on the counter and %
concentration of the chemical product
cc/stroke
0.23
F300s/m
 The dosage frequency value can be
modified by pressing the + or – keys
at the same time.
EN
7.0ml
Dosage value
Dosage value
1.0
 Programmed
ppm value
6

Publicité

loading