Publicité
Les langues disponibles
Les langues disponibles
Tools and Materials
Before You Begin
NOTICE: Adequate floor support must be provided. Note the model number located on the heater side
of the bath, then visit the product page at kohler.com for additional information.
NOTICE: Before installing a rim-mount bath faucet, refer to the specification sheet on the bath product
page at kohler.com.
NOTICE: Provide adequate backer board support for a rim-mount faucet; large faucets that may be
inadvertently used as a means of support are not safe for this installation.
NOTICE: For Wireless Music Kit: Refer to the instructions included with the music kit for wiring and
installation details.
IMPORTANT! To ensure a successful installation, install the bath on a level, finished floor.
Observe all local plumbing and building codes.
Unpack and inspect the bath and components for damage. Return the bath and components to the
carton until installation.
To simplify future maintenance, make sure all plumbing connections around the bath are easily
accessible.
Carefully plan moving the bath into the installation area. This bath will not easily fit through
doorways.
Two people are needed to install this product.
This bath is designed for freestanding installation only.
If installing a rim-mount faucet, make sure there is no interference above or below the rim before
drilling any holes.
Illustrations shown may not look like your actual product but they still apply to this installation.
This bath conforms to CSA B45.5/IAPMO Z124. All dimensions are nominal.
Kohler Co.
Construction
Adhesive
100% Silicone
Sealant
3
Plus:
• Drop Cloth
• Shims
• 2x4s
• Wood Blocks
• 1/2" (13 mm) Exterior
Grade Plywood
(for Rim-mount Faucet)
1237788-2-G
Publicité
