Ibiza Light LMH410Z Manuel D'utilisation page 6

diSP – Reverse display
1. Press MENU until DISP is displayed. Press ENTER.
2. Press ethe UP button to select DIP to reverse the display, or DISP to change the display back.
3. Press ENTER to cinform.
PInt - Pan Inversion
1. Press the MENU button until "PINT" is displayed, press ENTER. Either "YES" or "NO" will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons until YES is displayed, press ENTER to confirm. To
deactivate Pan inversion, select NO and press Enter.
tInt - Tilt Inversion
1. Press the MENU button until "TILT" is displayed, press ENTER. Either "YES" or "NO" will be displayed.
2. To activate the Tilt inversion press the UP or DOWN buttons until YES is displayed, press ENTER to confirm. To
deactivate Tilt inversion, select NO and press Enter.
bALA – Adjustment of RGB colors to make your desired color
1. Press the MENU button until "BALA" is displayed, press ENTER.
2. Press the UP or DOWN buttons until the desired color is displayed, press ENTER.
3. The displayed value will begin to flash. Adjust the value with the UP/DOWN buttons. Once you have made your
adjustment, press ENTER.
4. Repeat steps 2-3 until you are satisfied.
Manu –Allows you to test the different functions: Pan, tilt, LED, zoom, dimmer and strobe
1. Press MENU until MANU is displayed. Press ENTER.
2. Use the UP and DOWN buttons to scroll through the various functions able for testing. Once you have found your
desired function you would like to test press ENTER.
3. After you have pressed ENTER, use the UP and DOWN buttons to adjust the values and test the function. To exit
press the MENU button.
test – Self test program. Tests pan/tilt movement and colors
1. Press the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test. Press MENU to exit.
REST - System reset.
1. Press the MENU button until "REST" is displayed, press ENTER.
2. The fixture will now reset. Press MENU to exit.
Offset Menu:
To enter the offset adjustment submenu, press the ENTER button for at least 5 seconds. In this submenu you are
able to adjust the original position of the pan, tilt.
PAN - Adjustment of the pan position.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that "PAN" is displayed,
press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the MENU
button for one second to exit.
©Copyright LOTRONIC 2016 LMH410Z Page 6