VATECH EzRay Air Portable Manuel D'utilisation page 60

5. Service Mode
5.3.11 Password Setting
Perform this mode to change the password.
Service Mode No.
n.24
To change the password,
Select n.24 by pressing the jog dial, then the default password "000" is displayed
1.
on the Control Panel as shown in the following figure (right).
2. When the first digit flashes, turn the jog dial to change the password and then
save it by pressing the jog dial.
3. Follow the same procedure for the next two digits.
4. Check if the new password has been correctly saved.
54
Item
Password setting
EzRay Air Portable (Model: VEX-P300) User Manual