VATECH EzRay Air Portable Manuel D'utilisation page 56

5. Service Mode
5.3.7 Waiting Time Setting for the Sleep Mode 2
Perform this mode to set up the waiting time for the Sleep Mode 2. (default: 5 minutes)
Service Mode No.
n.20
To change the waiting time for the Sleep Mode 2,
Select n.20 by pressing the jog dial, then the default time "005" (5 minutes) is
1.
displayed on the Control Panel as shown in the following figure (right).
2. The waiting time can be modified from 1 to 999 minutes.
Turn the jog dial to set the time, and save the setting.
3. Check if it has been correctly saved.
50
Item
Waiting time setting for the Sleep Mode 2
EzRay Air Portable (Model: VEX-P300) User Manual