Table des Matières
Publicité
5.3.10
Power Down Mode On/Off
Perform this mode to turn on/off the Power Down Mode.
Service Mode No.
n.23
To change the Power Down Mode On/Off setting,
1.
Select n.23 by pressing the jog dial, then the default setting "001" is displayed on
the Control Panel. ("001" = On, "000" = Off)
2.
To turn off the Power Down Mode, change the setting from "001" to "000" by
turning the jog dial.
3.
Save the setting, and check if it has been correctly saved.
4.
To turn on the Power Down Mode again, follow the same procedure as described
above.
EzRay Air Portable (Model: VEX-P300) User Manual
Item
Power Down Mode On/Off
5. Service Mode
53
Publicité
Chapitres
Table des Matières
