Publicité
Les langues disponibles
Les langues disponibles
ERGON BIKE ERGONOMICS
Cargostrap (optional available)
Take out the Cargostrap out of the backpack. Then attach
the four hooks to the corresponding loops at the bottom and
on both sides of the pack. By loosening and tightening the
straps individually bulky items can be mounted to the pack and
transported safely.
The Cargostrap can also double as compression straps for the
pack.
Stand-Alone Reinforced Floor
For increasing the pack's stability and to better protect the con-
tent the backpack features a removable Stand-Alone Reinforced
Floor. The reinforced floor can be removed to make the pack
more pliable, e.g. for storing. To do this, simply reach inside, fold
down the raised wings (secured by Velcro) and remove by lifting.
Trimming the straps
All straps can be trimmed to length if desired. Afterwards, fuse
the cut edges with a match or pocket lighter to prevent fraying.
CAUTION: Always check for correct size adjustments of
the backpack and adequate hip belt length BEFORE
trimming (see pages 13-14)! Straps that are trimmed too
much are not subject to returns or warranty claims!
After trimming – the product may not be returned or
exchanged!
Step 1
Step 2
16
EN
+
Publicité
