Welding Preparation - SmartFLeX 8403Multi Mode D'emploi

Welding Preparation

To ensure good welding results, carefully follow ALL the instructions given
below:
Cut the pipe correctly with the pipe cutter.
Measure and mark the fitting insertion length on the pipe with the white pipe
marker.
Scrape the pipe evenly with a pipe scraper.
Clean both pipe and fittings with a clean cloth soaked in liquid primer.
Assemble the pipes with the aid of the pipe aligner after inserting the pipe into
the fitting.
For further information see the SMARTFLEX TECHNICAL CATALOGUE.
1
4
2
5
7
3