Delete Memory - Welding Data; Pressure Test Mode; Data Recording - SmartFLeX 8403Multi Mode D'emploi

Delete Memory – Welding Data
Select the Delete Memory option in the main menu and press the ENTER
key, the screen at the right will appear. Press the ENTER
confirm the deletion or ESCAPE

Pressure Test Mode

After confirming the choice to pressure test, the screen at right will be
displayed. Use the
the ENTER key for confirmation. Press the ESCAPE
the previous screen.

Data Recording

Starts the built-in data recorder
Print Memory
Prints a hardcopy of the pressure test report. This option is available only if a
Hewlett-Packard compatible printer is connected to the Multi-Function
Welding Unit.
Delete Memory
Deletes pressure test data from the Multi-Function Welding Unit's memory.
Data Recording
WARNING: Before commencing the pressure test, check that the
Pressure Test Unit is properly connected to the Multi-Function Welding
Unit, to the pressure source (air compressor or nitrogen bottle) and to
the piping system (see Text Box lay-out). Also ensure that the pressure
test barcode is readily available.
After confirming the choice, the screen shown on the right will appear. Press
the ENTER key to continue or the ESCAPE
previous screen.
Pressure test readings can be stored into four different memories, use the
keys to select the desired memory and then press the ENTER
key for confirmation or the ESCAPE
If the memory has not previously been used, no description will appear in the
field next to the memory name (MEM1, MEM2, etc.).
automatically fills in this field using the same string entered in the
"Information" field during the general data input.
After selecting the memory to be used, the display will show the display on the
right, remove the optical pen from its holder and scan the barcode containing
the following parameters:
to return to the previous screen.
keys to select the Function desired and then press
key to return to the previous screen.
key again to
key to return to
key to return to the
The system
12
Operation
Welding
Print Memory
Delete Memory
Confirmation ?
Yes ENT No ESC
Operation
Data Recording
Print Memory
Delete Memory
Choose Memory
[ENT – ESC]
MEM1="..........."
MEM2="..........."
MEM2="..........."
MEM3="..........."
Scan Barcode
____________________