Shoulder Harness Position; Shoulder Harness Straps Height - Nuna pipa Manuel D'instructions

Shoulder harness
position
Check that Shoulder Harness Straps are set at
the proper height. Please choose the proper
pair of shoulder harness slots according to the
child's height.
Shoulder Harness Straps must go into the
harness slots nearest to your childs shoulders
(4) , but not above the shoulder line. (5)
If the Shoulder Harness Straps are not at proper
height, the child might be ejected the infant car
seat if there is a crash.
Contents
of the box
Nuna Pipa Car Seat
Tools Needed: None
15
Shoulder harness
straps height
adjustment
Use extreme care in threading the Shoulder Harness Straps
according to the figure. If the Shoulder Harness Straps are not
secure, they will not protect your baby.
The ends of the Shoulder Harness Straps must hang in front of
the junction plate.
Ensure that the shoulder harness straps are not twisted before
reassembling the ends onto the junction plate.
1 Press the adjustment button at the front of the seat and pull
on the shoulder harnesses to loosen them.
2 At the back of the seat, take the harness ends off the metal
(7)
junction plate.
3 Pull the harnesses through the slots in the seat. Insert them
into the appropriate set of slots.
4 Reassemble the harness ends onto the junction plate.
The ends of the Shoulder Harness Straps have two loops.
For a smaller baby, use the upper shoulder harness loops.
(10)
For a larger baby, use the end shoulder harness loops.
(6)
(8)
(9)
(11)
16