Detach Canopy And Seat Pad; Cleaning And Maintenance; Warranty And Service - Nuna pipa Manuel D'instructions

Detach canopy
and seat pad
1 To disassemble the canopy, press the button in the canopy
mount and pull the canopy bow out.
2 Pull the fastening pieces underneath the edge of the seat
(27)
out.
3 Pull the harness out of the metal junction plate.
4 Remove the seat pad from the adjustment button as shown
(28)
in.
5 Remove the seat pad from the Stroller release button as
(29)
shown in.
Cleaning and
maintenance
After child is older than 6 months, please remove the foam
from the infant insert and store it somewhere your child
cannot access it.
Please wash the soft goods with cold water under 30°C.
Do not iron the soft goods.
Do not bleach or dry clean the soft goods.
19
(26)
(7)
Do not use undiluted neutral detergent, gasoline or other
organic solvent to wash the infant car seat. It may cause
damage to the infant car seat.
Use only mild detergent, water and a soft cloth to clean the
car seat shell, handle and harness straps.
Do not twist the soft goods to dry with great force. It may
leave the soft goods with wrinkles.
Please hang dry the soft goods in the shade.
Please remove the infant car seat from the vehicle seat if not
in use for a long period of time. Put the infant car seat in a
cool, dry place and somewhere your child can not access it.
Warranty
and service
The Nuna car seat is covered by a one-year warranty. If this
product shows a defect during the warranty period, please
contact your retailer. If the retailer is unable to help you, they will
make contact with the local Nuna distributor.
Please be aware that the model number and serial number
located on the back of the seat of the product will be required in
the event of a warranty claim.
To register your product, please go to our website at nuna.eu
20