Certifications - Oakton 35625-40 Mode D'emploi

Code: Battery symbol
Problem: Possible low battery
Action: Check and/or replace battery
Code: Blank display
Problem: Possible dead battery
Action: Check and/or replace battery
Other Operational Considerations
All models should be protected from
the following:
• EMI (Electro Magnetic Interference) from
induction heaters and microwave ovens
• Electrostatic discharge
• Should the unit become damaged, check the
accuracy of the unit by performing the verifi-
cation process recommended in this manual.
If the unit is out of calibration, do not rely on
it for critical temperature measurements.
• Heat from stovetops, pans, or other hot
surfaces (don't set it on the stove)

Certifications

CE
This instrument conforms to the following
standards:
• EN 61326-1 Electromagnetic Emissions
and Susceptibility
• EN 61010-1 General Safety
• IP54
20