Setting/Changing ºc / ºf Temperature Scales - Oakton 35625-40 Mode D'emploi

Setting/Changing ºC and ºF
Temperature Scales
The food safety thermometer can display
temperature in either the ºC (Celsius) or ºF
(Fahrenheit) scales. The desired scale is
selected at the time the battery is installed:
NOTE!
For ºF Press SET
within 15 seconds
Selecting the ºC Scale:
of connecting
battery
When the battery is connected to the battery
leads the ºC scale indicator shows on the
display for approximately 15 seconds. If no
(Disconnect
press of the SET button is made, the unit will
battery to reset)
time out and default to the ºC or Celsius scale.
Selecting the ºF Scale:
Defaults to
If the SET button is pressed within 15 seconds
ºC after 15
seconds
of connecting the battery to the battery leads,
the temperature scale display will toggle to the
Figure 14
ºF scale indicator and the unit will now default
to the ºF or Fahrenheit scale (Figure 14).
Note: The ºC/ºF temperature scale initialization
process must be performed whenever battery
power is interrupted or the battery is replaced.
Cleaning Instructions
This food safety thermometer is sealed to IP54
standards. The unit may be wiped down with a
wet sponge or cloth using a mild water based
detergent or anti-bacterial soap and rinsed
under a gentle stream of cold water
(Figure 15).
Note: This unit is not designed for complete
submersion or washing in automated
Figure 15
dishwashers.
18