Sony Aiwa CDC-X30MP Mode D'emploi page 7

To
Eject a CD
Skip to the next track
Go back to the beginning
of the current track
Each extra press skips
backward one extra track
Locate a specific point in
a track
Notes
• When you play a CD that is already inserted, CD play
starts at the point where it stopped the previous time.
A newly inserted CD starts from the first track.
• A CD-R or CD-RW may take some time to start playing
back, but this is not a malfunction.
• If a CD-R or CD-RW with no data is inserted,
"ERROR03" will appear on the display. The unit cannot
play such discs.
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on a CD.
1
Press INT during CD play.
"INTRO" appears on the display.
2
Press INT again when the desired track is played.
The unit returns to normal CD play.
One Track Repeat Play
You can play a track repeatedly.
1
Press REP1 during CD play.
"REP1" appears on the display.
To cancel One Track Repeat Play, press REP1 again.
Shuffle Play
You can play all the tracks in random order.
1
Press SHUF during CD play.
"SHUF" appears on the display.
To cancel Shuffle Play, press SHUF again.
Note
During Shuffle Play, pressing r allows you to skip
only to the beginning of the current track, not to the
previous track.
Press
z
t/g
r/f
Press and hold r/f
or t/g until you find
the point.
Before playing an MP3
The unit can play back MP3* files recorded on CD-ROM
or CD-R or CD-RW. MP3 files are played in numerical
then alphabetical order. The unit starts playback from
the files with a digit at the beginning of the filename.
* An MP3 file (that has the ".mp3" extension) stores
audio data compressed using MPEG1, the audio
layer-3 file-coding scheme.
Within this section, we refer to what are called "MP3 file"
and "folder" in PC terminology as "track" and "album,"
respectively.
Notes on MP3
• MP3 tracks must be recorded on a disc in a format
compliant with ISO 9660. Note, however, that the
unit may not play such tracks in the order they were
recorded.
• The maximum number of playable tracks is 512 if
the disc was recorded in compliance with the ISO
9660 level -1 standard (all names of albums and
tracks must be within 12 characters).
The maximum number of playable tracks is 512 if
the disc was recorded in compliance with the ISO
9660 level -2 standard (all names of albums and
tracks must be within 31 characters).
• The maximum allowable depth of nested albums is
8, including the root album (directory).
• The unit can play only tracks having a file extension
".mp3."
• If a disc contains audio tracks plus MP3 tracks, the
unit only plays the audio tracks.
• With multisession discs, the unit can play up to 5
sessions. You cannot play an MP3 file having the
session that is not closed.
• The unit may not play tracks recorded with a
packet-writing utility.
• When playing a track converted with a bit rate of
8 kbps or VBR (variable bit rate), Intro playback
may not work properly.
• A non-MP3 track that has the ".mp3" file extension
is not played.
6
ENGLISH