Description - Stiga SBC 48 AE 48 Basic Manuel D'utilisation

SPECIFICATIONS/DESCRIPTION
SERVICE
Servicing requires extreme care and knowledge and
should be performed only by a qualified service
technician.
For service we suggest you return the product to your
nearest AUTHORISED SERVICE CENTRE for repair.
When servicing, use only identical replacement parts.
3. TECHNICAL DATA
Voltage
No load speed
Cutting head
Cutting Line Diameter
Cutting Path Diameter
Features of bump feed/Brush- cutter Blade
Weight with battery
Measuered sound pressure level
Measuered sound power level
Lawn Trimmer
Guaranteed sound power level
Vibration
Measuered sound pressure level
Measuered sound power level
Brush Cutter
Guaranteed sound power level
Vibration
ANNEX E ANNEX D
NOTE: THE DECLARED VIBRATION TOTAL VALUE HAS BEEN MEASURED IN ACCORDANCE WITH A STANDARD
TEST METHOD AND MAY BE USED FOR COMPARING ONE TOOL WITH ANOTHER; THE DECLARED VIBRATION
TOTAL VALUE MAY ALSO BE USED IN A PRELIMINARY ASSESSMENT OF ExPOSURE.
WARNING:
THE VIBRATION EMISSION DURING ACTUAL USE OF THE POWER TOOL CAN DIFFER FROM THE DECLARED
TOTAL VALUE DEPENDING ON THE WAYS IN WHICH THE TOOL IS USED; AVOID VIBRATION RISK SUGGESTION:
WEAR GLOVE DURING OPERATION LIMIT OPERATING TIME AND SHORTEN TRIGGER TIME.

4. DESCRIPTION

1. Battery pack
3. Rear handle
5.Fast/slow button
7. Switch trigger
9.Front handle
11.Grass deflector
13.Blade
The example of the conformity declaration is found in the penultimate page of the manual.
2. Battery charger
4.Lock-off button
6.On/off power button
8. Lock latch
10.Couple
12.Trimmer head
14. Cut-off Blade
The operation of any power tool can result in foreign
objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool
operation, always wear safety goggles, safety glasses
with side shields, or a full face shield when needed.
We recommend Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side
shields. Always use eye protection which is marked to
comply with EN 166.
43.2 Volt DC
6500/min Max
Bump feed/Brush0cutter Blade
2.0mm
356mm/254mm
Max speed 10000rpm/4 teeth/
max speed 1000rpm
Max 6.4kg
L =81 dB(A), K
PA
L =93.5 dB(A), K
WA
L =96 dB(A)
WA
4.0m/s ,k=1.5m/s
2
L =82 dB(A), K
PA
L =95.2 dB(A), K
WA
L =100 dB(A)
WA
3.0m/s , k=1.5m/s
2
15. EC Conformity marking
16. Name and address of the manufacturer
17. Acoustic power level according to directive 2000/14/
EC
18. Article Code
19. Machine model
20. Serial number
21. Year of manufacture
EN
WARNING
=3 dB(A)
PA
=3 dB(A)
PA
2
=3 dB(A)
PA
=3 dB(A)
PA
2
4