About The Machine; Machine Description And Intended Use - Stiga MH 900 Li 48 Manuel D'utilisation

must be separated and taken to collection
centres, which will recycle the materials.
• Scrupulously comply with local regulations
for the disposal of waste materials
• When the machine is withdrawn from service,
do not dispose of it in the environment,
but take it to a waste disposal facility in
accordance with the local regulations in force.
Do not throw electrical equipment away
with domestic waste. According to the
European Directive 2012/19/EU on
electrical and electronic equipment waste
and its implementation in compliance
with national standards, old electrical equipment
must be collected separately, for eco-compatible
recycling. If electrical equipment is disposed
of in a landfill or in the ground, the harmful
substances can reach the water table and
enter the food chain, damaging your health
and well-being. For further information on the
disposal of this product, contact your dealer
or a domestic waste collection service.
At the end of their working life, dispose
of batteries safely in an eco-friendly
manner. Batteries contain material
classified as hazardous for you
and the environment. They must be
removed and disposed of separately at a
facility that accepts lithium-ion batteries.
Separate waste collection of the
products and packaging used allows
the materials to be recycled and reused.
Reuse of recycled materials help to
prevent environmental pollution and
reduces the demand for raw materials.
2.5 RESIDUAL RISKS
Even when all safety rules are observed,
there may still be certain residual risks
which cannot be excluded. From the kind
and construction of the tool the foreseeable
potential endangerments can be:
• Hurled materials that may injure the eyes;
• Damage of the hearing, if no
protection of the ears is carried.

3. ABOUT THE MACHINE

3.1 MACHINE DESCRIPTION
AND INTENDED USE
This machine is a garden tool and more precisely
a battery-powered portable hedge trimmer.
The machine is essentially composed of
a motor which drives a cutting means.
The operator can operate the machine and
use the main controls, always keeping a
safe distance from the cutting means.
3.1.1 Intended use
This machine was designed
and manufactured for:
• cutting and trimming bushes and hedges
comprising shrubs with small branches
• being used by one operator.
3.1.2 Reasonably
improper use
Examples of improper use may include,
but are not limited to (for example):
• cutting grass in general and in
particular close to kerbs;
• shredding of materials for composting;
• pruning;
• using the machine with the cutting means
above the operator's shoulder level;
• use of the machine for cutting
non-plant material;
• using cutting means other than those
found in the "Technical Data" table.
3.1.3 Improper use
Any other usage, different than the ones
mentioned at par. 3.1.1 may be hazardous
and harm persons and/or damage things;
therefore, it is deemed improper use.
NOTE
Improper use of the machine will void the
warranty and relieves the Manufacturer of any
liability, placing all responsibility for damage or
injury, to him/herself or third parties, on the user.
EN - 5
foreseeable