Zigo Leader Manuel De Montage Et D'utilisation page 80

12.5 Cycle Rack
12.5.1 Install Cycle Rack
1. Align Rear Rack to the 4 attachment points on Cycle frame. Front Wheel
Mount Plate should point towards back of Cycle.
2. Using screws provided, attach Rear Rack to Cycle frame.
Attachment
Points
12.5.2 Storing Front Wheel on Cycle Rack
1. Hold the Quick Release Lever to the open position. Unscrew Quick Release
Nut enough to allow it to slide over the thickness of the Front Wheel Mount
Plate.
2. Insert nut side of the Quick Release Skewer through the Mount Plate and slide
down. It should slide freely.
3. Tighten nut and move Quick Release Lever into the locked position. Do not
force Lever. If Lever does not close easily, loosen the nut 1/4 turn and try
again.
80