Zigo Leader Manuel De Montage Et D'utilisation page 64

Adjusting Cycle Stem to Steerer Fork alignment
Stem Steer
Clamp Bolts
Stem
Failure to properly tighten the Handlebar Clamp Bolts may
compromise steering action, which could cause you to lose control
and fall. Place the Front Wheel of the bicycle between your legs and
attempt to twist the Handlebar/Stem assembly. If you can twist the
stem in relation to the front wheel or turn the Handlebar in relation
to the Stem, tighten the appropriate Bolts.
For Professionals ONLY
Adjust the Tie Rod, then the Drag Link.
Drag Link
Tie Rod
64
!
WARNING!
Turnkey
1. Loosen locking nuts.
2. Turn Tie Rod Turnkey as necessary to
3. Tighten locking nuts.
4. Contact Zigo® for more detailed
Locking Nut
1. Loosen both bolts
of the Stem Steerer
Clamp one or two
turns.
2. Gently tap Stem with
the palm of your
hand until it points
straight ahead.
3. Re-tighten the two
bolts the same
number of turns that
you loosened them.
adjust alignment.
instructions.