Zigo Leader Manuel De Montage Et D'utilisation page 46

6.1.2 Release LeaderLink® Brake Coupler
6.1.3 Release Pod Clamp
6.1.4 Uncouple Leader™
46
1. Turn counterclockwise.
NOTE
Pull up on the LeaderLink® Brake
Coupler Knob to verify that the
LeaderLink Brake Coupler has
®
been disconnected. The Cycle
cannot be uncoupled from the
ChildPod® if the connection is
not released.
1. Turn counterclockwise.
1. Pull the Cycle up and
off the ChildPod
NOTE
If the Cycle does not lift off the
ChildPod® easily, double check
that the LeaderLink® Brake
Coupler Knob and Pod Clamp
Knob are completely disengaged.
.
®