Zigo Leader Manuel De Montage Et D'utilisation page 24

3. Remove
LeaderLink® Post
Cover.
4. Erect ChildPod®.
5. Reposition
Pushbar.
7. Attach Safety Tether to D-Ring above Hitch Beam.
8. Ensure that Lap Belts are properly configured for either one or two children.
See Section 8.1 in the Zigo Leader Assembly and Operation Manual.
9. Troubleshoot LeaderLink® Braking. See Section 10.0, Troubleshooting.
Lower Caster Wheels
Keep fingers clear of moving parts. You may pinch your fingers.
Install Push Button Release Rear Wheels
Failure to install Push Button Release Wheels properly may result in
serious injury or death
Erect ChildPod®
Ensure that ChildPod® Frame Back has locked into its upright
position prior to loading with passengers. Failure to do so may
result in serious injury or death to passenger(s).
24
6. Engage Steering Lock (for use in Stroller,
Jogger, or Trailer Mode).
!
CAUTION
!
WARNING!
to rider and passenger(s).
!
WARNING!
1. Lower Caster
Wheels.
2. Install Push Button
Release Rear
Wheels.